Accept Credit Cards Online


>

Enter Your Email To Sign Up
For Our E-Newsletter:


Home > Accessories
Sort By:
Page of 8
TAVOR SAR Conversion Kit (9mm Para) High Tower Armory 90/22â„¢ - Bullpup Conversion Kit Percival Armaments - El Selector - Tavor Thumb Safety
TAVOR SAR Conversion Kit (9mm Para)
List Price: $899.99
Our Price: $749.99
Savings: $150.00
IWI TAVOR SAR Conversion Kit converts an existing 5.56 rifle into a 9mm. Includes all the parts needed for the 9mm conversion, one 32 round magazine**, and a barrel lock wrench. 9mm Parabellum conversion kit with a Cold Hammer Forged 17" barrel**, 1:10 twist, CrMoV steel


** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
The High Tower Armory 90/22 is a compact, maneuverable Bullpup conversion/stock kit for the Ruger® 10/22® which utilizes a fully ambidextrous Bullpup design for superior balance and ergonomics. This incredibly durable, military grade polymer stock will reduce the overall length of most 10/22’s to about 26 1/2 inches, just over the federally required minimum length for rifles!

Fits factory 18 1/2" contour barrels and .920" bull barrels at least 18 inches in length (17 1/4 inches from receiver face to muzzle). Know your laws/restrictions, as this product functioning with a donor firearm may not be legal in some areas.

Made in the USA!

A HTA 90/22 Extended Mag and Bolt Release combo ($29.99 value) is included FREE with these kits!

Ruger 10/22 not included
Percival Armaments introduces the "EL SELECTOR" TAVOR THUMB SAFETY !
A 1911-style safety for the IWI Tavor®. Solves the issue of having the lever in the way, and getting bumped into the safe-position during a fire-fight. When in the fire-position, the El Selector's create a shelf for the thumb on one side, and an indexing point against (not under) the trigger finger on the other side. Creates a more repeatable grip, more positive purchase of the grip, and improved accuracy. Annodized Aluminum (6061-T6) for high-strength and light-weight. Available for the Left-side, Right-side, or both in the Ambi-Pack!

- "Patent Pending"

- Made in the USA!!
Geissele Automatics - Tavor® Super Sabra Trigger Pack Geissele Automatics - Tavor® Super Sabra Lightning Bow Trigger Aklys Defense ZK-22 - Ruger® 10/22®  Bullpup Conversion Kit
Aklys Defense ZK-22 - Ruger® 10/22® Bullpup Conversion Kit
Our Price: $249.99
Sale Price: $229.99
Savings: $20.00

The Geissele Super Sabra is a drop in replacement for the OEM Fire Control Group (commonly called the "Trigger Pack"). The Super Sabra provides a precision two-stage trigger pull and allows precise and accurate trigger control. Geissele's two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for close quarter combat (CQB). The Geissele Super Sabra also features an adjustable first stage, which will allow the shooter the ability to fine tune the first and second stage weight distribution, without compromising the total pull weight.


*This is a Generation 2 trigger pack that is fully compatible all IWI Tavor Rifles.

The Geissele Super Sabra Lightning Bow Trigger is precision machined from precipitation hardened 17-4 and is designed to replace the standard trigger in IWI Tavor® rifles. Once installed, the Sabra Lightning Bow is adjustable via a set screw that removes the “slack” that is inherently found in the trigger mechanism of those rifles. By removing the slack, the trigger pull is instantly transformed into a feel that is much more familiar to that of an M4 Carbine. Pairing the Sabra Lightning Bow with a Super Sabra Trigger Pack will result in a pull that is truly two stage and has a match grade feel.

The Aklys Defense ZK-22 drop-in stock kit will accept any standard Ruger 10/22 receiver with carbine barrel, or .920" Bull barrel ,18.5" or longer. This conversion turns your tried and true Ruger carbine into a lightweight, rugged ambidextrous Bullpup.

Fits factory 18 1/2" contour barrels and .920" bull barrels at least 18.5 inches in length. Know your laws/restrictions, as this product functioning with a donor firearm may not be legal in some areas.

Made in the USA!


Ruger 10/22 and other accessories shown are not included.
TAVOR SAR Conversion Kit (556NATO) TAVOR X95 Conversion Kit (9mm Para) TAVOR X95 Conversion Kit (300 Blackout)
TAVOR SAR Conversion Kit (556NATO)
Our Price: $899.99
Sale Price: $799.99
Savings: $100.00
TAVOR X95 Conversion Kit (9mm Para)
List Price: $899.99
Our Price: $749.99
Savings: $150.00
TAVOR X95 Conversion Kit (300 Blackout)
List Price: $899.99
Our Price: $749.99
Savings: $150.00
IWI TAVOR SAR Conversion Kit converts an existing 9mm rifle into a 5.56. Includes all the parts needed for the conversion, 5.56 barrel, bolt/bolt-carrier, ejection port frame & shell deflector, one 30 round magazine**, and a barrel lock wrench. 5.56 NATO conversion kit with a Cold Hammer Forged 16.5" barrel**, 1:7 twist, CrMoV steel. Longer muzzle devices sold separately.


** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
IWI TAVOR® X95™ Conversion Kit converts an existing 5.56 rifle into a 9mm. Includes all the parts needed for the 9mm X95™ conversion.
Please note this kit only works with the Tavor® X95™!

The 9mm kit will come in right hand configuration however it is fully convertible to left ejecting (follow the instructions in your owners manual).

** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
IWI TAVOR® X95™ Conversion Kit converts an existing 5.56 rifle into a 300 Blackout (.300 AAC). Includes all the parts needed for the X95™ 300BLK conversion.
Please note this kit only works with the X95™!

16.5" Barrel
Right Hand Bolt
30-Round Magazine

** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
Mepro MX3 Magnifier with IDF-model adaptor JudoChop FS2000 Charging Handle Gear Head Works AUG Charging Handle - Mod 1
Mepro MX3 Magnifier with IDF-model adaptor
Our Price: $579.99
Sale Price: $499.99
Savings: $80.00
The MEPRO MX3 provides a decisive solution for any operator in the field. Its 3x magnification enhances the precision and effectiveness of reflex sights such as the MEPRO 21 and the MEPRO MOR.
Built in Tavor adapter for mounting on your IDF-model Tavor (no "flat-top" rail).
Made in Israel.
Anodized aluminum replacement charging handle for the FS2000.  This robust replacement part fixes the issues with the original plastic piece, and provides a bigger and serrated surface for charging the Bullpup!

Made of T6 6061 Aluminum with mil-spec type 3 Class 2  hard anodize, Black

These "JudoChop" handles are precision engineered by Aerospace Resource Group manufacturing (Gen 4).
After 2 years with the original GHW AUG low profile charging handle we are happy to make available the next generation, the AUG-CH-Mod1.
This handle is lighter and shorter. It sticks out less and is a 1 finger charge size. It has a deep finger groove with serrations to ensure positive action. The outside edge is longer and much more contoured than the old design resulting in more comfort when the rifle is slung.

The biggest new feature to the Mod1 version is the ability to fold up and utilize the forward assist. By utilizing all the factory springs and hardware, the handle stays down in the ergonomic angle GHW's pioneered with the original handle. But when needed, simply push up on the handle and it folds to engage the forward assist. More serrations provide a slip free action when using it this way. The handle can also be folded up when locked back to give the rifle the ability to lay flatter on a surface. Normal operation still leaves the handle straight out to the side when locked back and it still has the ability to be slapped to unlock.

Made in the USA!
Man Kave PS90 Extended Charging Handle Kel-Tec RFB Buttpad Spacers Homeland Guns Tavor Metal Safety - MAMBA

Extended Charging Handle for the PS90, more than doubles the surface area of the original part. Giving a more comfortable feel and positive contact when charging your PS90. Get one for the strong side, or two for extending on both sides.

Made in the USA!

The RFB Buttstock Spacers are designed to allow the shooter to customize the length of the RFB stock, effecting the length of pull. Each spacer will add approximately half an inch (0.55 inches) to the length of the RFB stock, allowing the shooter to customize their level of shooting comfort. The kit includes three (3) spacers.

Made in the USA!
This MAMBA metal safety is a direct drop in upgrade that will work on the left or right side of the Tavor. Available as BIG MAMBA or LIL MAMBA (sold individually). Use each safety in any combination to get a custom ambidextrous application. But typically, the BIG MAMBA is used on the "thumb" side of the rifle, giving a larger tactile surface for manipulating the safety. While the LIL MAMBA is used on the opposite side, and is a bit more sleek in design, to not be intrusive to the shooting hand holding the grip. But any single or combination will work for your particular needs.
Kel-Tec KSG Extended Butt-Pad AMP Engineering PS90 Tactical Trigger P90-PS90 Charging Handle - Oversized Extended - Nylon and Carbon Fiber
The new KSG Extended Butt-Pad expands the surface area of the face of the pad, and more than doubles the thickness, with a cushioned rubberized material, to soften felt recoil greatly. This is a replacement/upgrade part (not a "slip-on"), instructions included.

Kel-Tec factory part, made in the USA!
AMP Engineering makes a revised and upgraded trigger for the PS90, making this awesome Bullpup even more comfortable and fun to shoot. Precisely CNC machined from 6061 aluminum bar stock, meticulously finished, microfinished, then hard black anodized to a mil-spec Type III finish. The AMP Engineering Tactical Trigger is far more comfort than the plastic stock trigger. Has an excellent tactile feel with a nicely curved face, beveled sides, line serrations, and skeletonized for weight savings. This trigger will not alter the pull weight, but with the improved ergonomics and positive trigger-finger manipulation, you'll appreciate the upgrade!

Made in the USA!

An Oversized Charging Handle for the P90/PS90, providing more surface area, and greater depth to manipulate the handle. One per package, but fits either side of the P90/PS90.

Black Nylon and Carbon Fiber.

Made in the USA!

P90-PS90 Charging Handle - Hook Style - Nylon and Carbon Fiber K and M Aerospace PS90 Folding Charging Handle - The Handler Kel-Tec RFB Tactical Operating Handle

A "hooked" Charging Handle for the P90/PS90, providing more surface area, and greater depth to manipulate the handle. One per package, but fits either side of the P90/PS90.

Black Nylon and Carbon Fiber for a super tough and strong part.

Made in the USA!

The Handler was developed by K&M Aerospace to solve the need for a replacement charging handle for the P90 / PS90. The folding charging handle is made out of aircraft grade aluminum and anodized to mil spec type III, class 2. There is a ball detent that keeps the handle folded in when not in use.

Made in the USA! Patent Pending
The Kel-Tec RFB Tactical Operating Handle is approximately 100% longer, approximately 20% wider, and has a stronger, wider scallop cutout compared to the original RFB charging handle. The combination of these allow for easier and smoother operation. And, just like the original, it can be mounted on either side of the RFB (ambidextrous!)

Made in the USA!
Homeland Guns K9 PS90 Charging Handle Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured Percival Armaments - Tavor and X-95 Shell Deflector - angled face for the 9mm
Homeland Guns K9 PS90 Charging Handle
Our Price: $49.99
Sale Price: $39.99
Savings: $10.00
The Homeland Guns K9 is an Aluminum charging handle for the FN PS90 that replaces the factory plastic knob. It has been hard coated Black, has a set screw installed, and there is an Allen-Key included. All you need to do is pry the plastic knob up and over the raised area on the charging bar and slide it off. The K9 slides right on and snugs up using the set screw. One handle per package, so you can do one side, or get two to be ambi!

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR and X95 with the redesign of the Shell Deflector.

For the 5.56 models. Shooting .223 or “light loads” through the Tavor SAR or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor and X95 with the redesign of the 9mm Shell Deflector.

Shooting “light loads” through the Tavor or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!
Percival Armaments - Tavor SAR Dust Protection Plate Percival Armaments - Tavor X95 Dust Protection Plate Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured - 300 AAC Blackout

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR with the redesign of the Dust Protection Plate.

Adding an after-market charging handle/rod to both sides of the Tavor SAR is now possible while keeping the function of a dust protection plate as part of the gas system.
A Barrel Lock Wrench is needed to make this upgrade.

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor X95 with the redesign of the Dust Protection Plate.

Adding a charging handle/rod to both sides of the Tavor X95 is now possible while keeping the function of a dust protection plate as part of the gas system.
A Barrel Lock Wrench is needed to make this upgrade.

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR and X95 with the redesign of the Shell Deflector.

For the 300 AAC Blackout models. Shooting sub-sonic or “light loads” through the Tavor SAR or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!
Mesa Tactical KSG Saddle-Rail 6&6 - 12ga Mesa Tactical KSG Rail (12 ga - 18" barrel) Gear Head Works Tavor Razorback - Short
Mesa Tactical's Kel-Tec KSG 12-Shell (6 per side) SureShell Side Saddle Mount w/ Rail

Includes the new taller blocks to fit all KSG models!

Replaces the original Kel-Tec top rail

Made in the USA!
Mesa Tactical's Kel-Tec KSG replacement anodized aluminum Picatinny optics rail.
Taller than the original rail, and with small aluminum flanges on either side of the main rail can accept additional lengths of Picatinny rail to support weapon lights or targeting lasers (small side rails sold separately).

Made in the USA!

Replacement rail for the Tavor SAR or X95. This is the "short" version. The SAR rail has a 20-slot rail that extends just over the gas block, and the X95 rail has 24-slots with the gas adjustment hole for 300BLK. Both add some height for a more comfortable cheek weld. Another advantage is that the rail does not need to be removed to do a barrel change (no re-zeroing!). The "short" version gives the flattop SAR owner a mod that inspires a more IDF-model look. And the X95 short rail is inspired by the Israeli sub-machine-gun X95.

Choose SAR or X95

Made in the USA!

** This listing is for the replacement rail only! The rifle, optics, and any other accessories shown are for display purposes only...
   
 

Copyright ©  Targeted Enterprises SC. All Rights Reserved. Built with Volusion