>

Enter Your Email To Sign Up
For Our E-Newsletter:


Home > TAVOR
Choose a sub category:
TAVOR Cases & Bags TAVOR Conversions
TAVOR Grips TAVOR Magazines
TAVOR Muzzle Devices TAVOR Rails
TAVOR Sights, Optics, & Mounts TAVOR Tools & Maintenance
TAVOR Safeties TAVOR Slings & Attachments
Sort By:
Page of 3
TAVOR SAR Conversion Kit (9mm Para)
Usually Ships in 24 Hours
List Price: $899.99
Our Price: $799.99
Savings: $100.00
(Out of Stock)
Mepro MOR Tri-Powered Reflex Sight with Red Laser - 4.3MOA Dot Reticle
Usually Ships in 24 Hours
Our Price: $1,196.99
In Stock
Mepro M21 Self-Powered Day/Night Reflex Sight - Bullseye Reticle
Usually Ships in 24 Hours
Our Price: $524.99
In Stock
IWI TAVOR SAR Conversion Kit converts an existing 5.56 rifle into a 9mm. Includes all the parts needed for the 9mm conversion, one 32 round magazine, and a barrel lock wrench. 9mm Parabellum conversion kit with a CHF barrel, 1:10 twist, CrMoV steel


** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
All-in-one electro-optical sight! Illumination is powered by ambient light during daylight, by tritium during darkness, and by battery power when needed to overcome difficult lighting situations. Includes built-in visible red laser. Made in Israel The Mepro M21 is a dual powered 30mm Reflex Sight, which collects sunlight in the day and uses tritium at night. Designed through close collaboration with Israeli Special Forces, the M21 was the first reflex sight in the world designed for close quarter combat, and has been continually improved, making it one of the most advanced sights available today .
Bullseye Reticle (also available with triangle reticle)
Made in Israel
Mepro M21 Self-Powered Day/Night Reflex Sight - Triangle Reticle
This item is currently on order
Our Price: $524.99
(Out of Stock)
Mepro MX3 Magnifier
This item is currently on order
Our Price: $529.99
(Out of Stock)
Mepro MX3 Magnifier with IDF-model adaptor
Usually Ships in 24 Hours
Our Price: $579.99
In Stock
The Mepro M21 is a dual powered 30mm Reflex Sight, which collects sunlight in the day and uses tritium at night. Designed through close collaboration with Israeli Special Forces, the M21 was the first reflex sight in the world designed for close quarter combat, and has been continually improved, making it one of the most advanced sights available today .
Triangle Reticle (also available with bullseye reticle)
Made in Israel
The MEPRO MX3 provides a decisive solution for any operator in the field. Its 3x magnification enhances the precision and effectiveness of reflex sights such as the MEPRO 21 and the MEPRO MOR.
Made in Israel.
The MEPRO MX3 provides a decisive solution for any operator in the field. Its 3x magnification enhances the precision and effectiveness of reflex sights such as the MEPRO 21 and the MEPRO MOR.
Built in Tavor adapter for mounting on your IDF-model Tavor (no "flat-top" rail).
Made in Israel.
Tavor Metal Safety
Subject to availability
Our Price: $29.99
(Out of Stock)
Galloway Precision - Tavor 45 degree Double Ended Safety
Usually Ships in 24 Hours
Our Price: $11.99
In Stock
Galloway Precision - Tavor Angled Shell Deflector
Usually Ships in 24 Hours
Our Price: $11.99
In Stock
This aftermarket metal safety is a direct drop in upgrade that will work on the left or right side of the rifle. Available in MEDIUM or SLIM profiles (sold individually). Use each safety in any combination to get a custom ambidextrous application.
Tilted 45 degrees to allow easy off, opposite the off lever is a wider end that allows for easy on safe also. Direct drop-in comes per side to make the rifle easy use for all shooters.

Select from:
  • RIGHT HAND SHOOTER (safety on left side of rifle)
  • LEFT HAND SHOOTER (safety on right side of rifle)

Made in the USA!
With the Tavor, owners that shoot 223 ammo often report the cases keep hitting them in the chin or down the shirt. By altering the angle of the shell deflector, Galloway Precision has been able to redirect the 223 cases away from the operator, fixing the problem when shooting from the weak side or transferring shoulders for fire around cover/corners.
Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!
Gear Head Works FLEx Swivel - Ejection Port Cover
Usually Ships in 24 Hours
Our Price: $49.99
(Out of Stock)
Gear Head Works Tavor Modular Forearm (TMF) - Black
Usually Ships in 24 Hours
Our Price: $119.99
In Stock
Gear Head Works Tavor Modular Forearm (TMF) - FDE
Usually Ships in 24 Hours
Our Price: $119.99
(Out of Stock)

FLEx stands for Fulcrum Located Extra swivel. It provides a centralized location for use with a single point sling or just an additional swivel location for a 2 point. It can be mounted on either side of a Tavor, with the swivel towards the front or rear of the rifle, replacing the plastic factory port cover. But its greatest feature may be that it also seals off the port from escaping gases that tend to leak out of the factory port cover. This phenomenon has become known as "Tavor face" and leaves you with black smudges on your cheek and shooting glasses, and is exacerbated with suppressor use. The GHW FLEx is truly a must have if you are running a suppressor on your Tavor!

Made in the USA!

An aluminum replacement forearm with modular capabilities for the Tavor by Gear Head Works, called the Tavor Modular Forearm, or simply the TMF.  Attach 1" light or laser in-line with the barrel, slots for ventilation and accepts Magpul rail sections and illumination kit.  Black (also available in FDE)
Rifle, light, grip, pressure pad, and pad kit shown in pictures, not included.

Made in the USA!
An aluminum replacement forearm with modular capabilities for the Tavor by Gear Head Works, called the Tavor Modular Forearm, or simply the TMF. Attach 1" light or laser in-line with the barrel, slots for ventilation and accepts Magpul rail sections and illumination kit. Flat Dark Earth (also available in Black)
Rifle, light, grip, pressure pad, and pad kit shown in pictures, not included.

Made in the USA!
Midwest Industries Tavor Ejection Port Cover
Usually Ships in 24 Hours
Our Price: $34.99
In Stock
Magpul Back-Up Sight Pro - Front (MBUS Pro)
Usually Ships in 24 Hours
Our Price: $80.99
Sale Price: $70.99
Savings: $10.00
In Stock
Magpul Back-Up Sight Pro - Rear (MBUS Pro)
Usually Ships in 24 Hours
Our Price: $99.99
Sale Price: $89.99
Savings: $10.00
In Stock
The MI Ejection Port Cover is an upgrade from the stock Tavor plastic cover. This cover is made of 6061 Hard Anodized Aluminum with either the Black or FDE finish. Complete with the full size backing plate, this cover will help "seal" off gasses that tend to escape from around the stock cover.

Works with either right or left side ejection.

Made in the USA!
The MBUS® Pro is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The dual aperture (windage adjustable Rear and no-tool, elevation adjustable Front) excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks.

Positive detents keep the MBUS PRO Front and Rear at standard AR sight height when deployed, and so low when they are stowed that you'll never notice them until they're needed. Narrow width Front is compatible with most IR aiming laser and light installations for the professional user.

Made in U.S.A.
The MBUS® Pro is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The dual aperture (windage adjustable Rear and no-tool, elevation adjustable Front) excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks.

Positive detents keep the MBUS PRO Front and Rear at standard AR sight height when deployed, and so low when they are stowed that you'll never notice them until they're needed. Narrow width Front is compatible with most IR aiming laser and light installations for the professional user.

Made in U.S.A.
Magpul MBUS Back-Up Sight – Rear GEN 2
Usually Ships in 24 Hours
Our Price: $55.49
In Stock
Magpul MBUS Back-Up Sight – Front GEN 2
Usually Ships in 24 Hours
Our Price: $37.99
In Stock
CAA FFS - Folding Flip Up Front Sight
Usually Ships in 24 Hours
Our Price: $34.99
In Stock
• Low-cost, color injection molded, folding back-up sight
• Dual aperture Sight is adjustable for windage
• Fits all Milspec 1913 Picatinny rail equipped firearms
• Low-cost, color injection molded, folding back-up sight
• Adjustable for elevation
• Fits all Milspec 1913 Picatinny rail equipped firearms
Super low profile front sight features a tool-less adjustable center post for elevation surrounded by two guide posts to assist in focusing the operator’s eye to the target.
CAA FRS - Folding Flip Up Rear Sight
Usually Ships in 24 Hours
Our Price: $46.99
In Stock
Homeland Guns WOR (Wash Out Remover) Kit for the Mepro21
Usually Ships in 24 Hours
Our Price: $29.99
In Stock
CAA Scope Mount - Dual Variable Scope Rings (DVSR)
Usually Ships in 24 Hours
Our Price: $43.99
(Out of Stock)
The rear sight features three operator selectable apertures, including the standard military A2 style double peep aperture with leaf sight aperture. All are click adjustable for windage. The W.O.R. helps with the washout experienced when aiming the Mepro21 into a well lit area, from a dark area.
The light collector on the Mepro21 has dimmed the reticle from the lack of light in the immediate area, although a brighter reticle is needed when pointed from the "dark" area into a "bright" area.  The W.O.R. solves the issue!

By installing the W.O.R. on the Mepro21, you can turn it on when a brighter reticle is needed.
Dual Variable Scope Rings is a one-piece mount for picatinny rails.
Fits scopes with 30mm scope diameter (or 1" with included inserts).
Center height measures 1.58” (from top of rail to center of scope).
Lightweight aluminum mount (5 oz) can be installed/removed in seconds with thumbnut.
Mako - FAB Defense Quick-Release Offset Light Mount (1")
Usually Ships in 24 Hours
Our Price: $25.99
(Out of Stock)
CAA - 5 Position Laser and Light Mount 1"
Usually Ships in 24 Hours
Our Price: $23.99
In Stock
Burris AR-QD Pivot Ring - 30mm
Usually Ships in 24 Hours
Our Price: $76.99
In Stock
Quick release, offset/side, composite rail mount for most 1-inch lights. Quickly move your light or laser from one side of the weapon to the other.
• Light or laser can be quickly repositioned for all situations
• Operator can easily access on/off button with thumb while using a vertical grip
• Locks in position at 0° 45° 90° 135° 180°
The AR-QD Pivot Ring is ideal for mounting a magnifying optic behind a primary optic.
Extremely easy use with Quick Detach rail attachment, and push-button engagement of the pivoting arm.
The Xtreme Tactical AR-QD Pivot Ring is designed specifically for carbines firing the .223 Rem or 5.56 Nato cartridges.
GGG 45 Degree Offset Accessory Rail
Usually Ships in 24 Hours
Our Price: $32.99
In Stock
Midwest Industries 22.5 Degree Offset Accessory Rail
Usually Ships in 24 Hours
Our Price: $32.99
In Stock
Blue Force Gear VCAS Padded Sling
Usually Ships in 24 Hours
Our Price: $49.99
In Stock
45 Degree Offset Accessory Rail 22.5 Degree Offset Accessory Rail by Midwest Industries The Vickers Combat Applications Sling has revolutionized the way weapons are carried. Ability to quickly transition from carrying a slung rifle comfortably to combat ready, the patent pending Quick Adjust has bridged the gap between the two primary uses of weapon slings – from transporting to fighting.
Magpul MS4 Magpul RSA QD Magpul RSA
Magpul MS4 Multi-Mission Sling System - Dual QD Sling
Usually Ships in 24 Hours
Our Price: $59.99
(Out of Stock)
Magpul RSA QD Rail Sling Attachment
Usually Ships in 24 Hours
Our Price: $28.99
In Stock
Magpul RSA Rail Sling Attachment
Usually Ships in 24 Hours
Our Price: $28.49
In Stock
• Quickly switch between one-point and two-point configuration
• Two heavy-duty push-button QD sling swivels
•  Compatible with QD sling cups

The RSA QD provides a sling attachment point for the MS4 and other QD sling systems • Steel construction • Melonite finish • Compatible with 1913 Picatinny rails

• All cast steel construction • Mil-spec black manganese phosphate finish • Works on any standard 1913 Picatinny-spec rail

   
 

Copyright ©  Targeted Enterprises SC. All Rights Reserved. Built with Volusion