Accept Credit Cards Online


>

Enter Your Email To Sign Up
For Our E-Newsletter:


Home > BULLPUP CARBINES
Choose a sub category:
IWI Tavor IWI X-95
Desert Tech MDR FN P90 / PS90
Kel-Tec RFB Kel-Tec RDB
Steyr AUG M17S
FN F2000 / FS2000
Sort By:
Page of 6
TAVOR SAR Conversion Kit (9mm Para) High Tower Armory 90/22™ - Bullpup Conversion Kit Percival Armaments - El Selector - Tavor Thumb Safety
List Price: $899.99
Our Price: $749.99
Our Price: $269.99
Our Price: $34.99
TAVOR SAR Conversion Kit (9mm Para) High Tower Armory 90/22â„¢ - Bullpup Conversion Kit Percival Armaments - El Selector - Tavor Thumb Safety
IWI TAVOR SAR Conversion Kit converts an existing 5.56 rifle into a 9mm. Includes all the parts needed for the 9mm conversion, one 32 round magazine**, and a barrel lock wrench. 9mm Parabellum conversion kit with a Cold Hammer Forged 17" barrel**, 1:10 twist, CrMoV steel


** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
The High Tower Armory 90/22 is a compact, maneuverable Bullpup conversion/stock kit for the Ruger® 10/22® which utilizes a fully ambidextrous Bullpup design for superior balance and ergonomics. This incredibly durable, military grade polymer stock will reduce the overall length of most 10/22’s to about 26 1/2 inches, just over the federally required minimum length for rifles!

Fits factory 18 1/2" contour barrels and .920" bull barrels at least 18 inches in length (17 1/4 inches from receiver face to muzzle). Know your laws/restrictions, as this product functioning with a donor firearm may not be legal in some areas.

Made in the USA!

A HTA 90/22 Extended Mag and Bolt Release combo ($29.99 value) is included FREE with these kits!

Ruger 10/22 not included
Percival Armaments introduces the "EL SELECTOR" TAVOR THUMB SAFETY !
A 1911-style safety for the IWI Tavor®. Solves the issue of having the lever in the way, and getting bumped into the safe-position during a fire-fight. When in the fire-position, the El Selector's create a shelf for the thumb on one side, and an indexing point against (not under) the trigger finger on the other side. Creates a more repeatable grip, more positive purchase of the grip, and improved accuracy. Annodized Aluminum (6061-T6) for high-strength and light-weight. Available for the Left-side, Right-side, or both in the Ambi-Pack!

- "Patent Pending"

- Made in the USA!!
Geissele Automatics - Tavor® Super Sabra Trigger Pack Geissele Automatics - Tavor® Super Sabra Lightning Bow Trigger Aklys Defense ZK-22 - Ruger® 10/22® Bullpup Conversion Kit
Our Price: $350.00
Our Price: $99.00
Our Price: $249.99
Sale Price: $229.99
Geissele Automatics - Tavor® Super Sabra Trigger Pack Geissele Automatics - Tavor® Super Sabra Lightning Bow Trigger Aklys Defense ZK-22 - Ruger® 10/22®  Bullpup Conversion Kit

The Geissele Super Sabra is a drop in replacement for the OEM Fire Control Group (commonly called the "Trigger Pack"). The Super Sabra provides a precision two-stage trigger pull and allows precise and accurate trigger control. Geissele's two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for close quarter combat (CQB). The Geissele Super Sabra also features an adjustable first stage, which will allow the shooter the ability to fine tune the first and second stage weight distribution, without compromising the total pull weight.


*This is a Generation 2 trigger pack that is fully compatible all IWI Tavor Rifles.

The Geissele Super Sabra Lightning Bow Trigger is precision machined from precipitation hardened 17-4 and is designed to replace the standard trigger in IWI Tavor® rifles. Once installed, the Sabra Lightning Bow is adjustable via a set screw that removes the “slack” that is inherently found in the trigger mechanism of those rifles. By removing the slack, the trigger pull is instantly transformed into a feel that is much more familiar to that of an M4 Carbine. Pairing the Sabra Lightning Bow with a Super Sabra Trigger Pack will result in a pull that is truly two stage and has a match grade feel.

The Aklys Defense ZK-22 drop-in stock kit will accept any standard Ruger 10/22 receiver with carbine barrel, or .920" Bull barrel ,18.5" or longer. This conversion turns your tried and true Ruger carbine into a lightweight, rugged ambidextrous Bullpup.

Fits factory 18 1/2" contour barrels and .920" bull barrels at least 18.5 inches in length. Know your laws/restrictions, as this product functioning with a donor firearm may not be legal in some areas.

Made in the USA!


Ruger 10/22 and other accessories shown are not included.
TAVOR SAR or X95 556NATO Bolt (in-house conversion service) TAVOR SAR Conversion Kit (556NATO) TAVOR X95 Conversion Kit (9mm Para)
Our Price: $109.99
List Price: $899.99
Our Price: $749.99
List Price: $899.99
Our Price: $749.99
TAVOR SAR or X95 556NATO Bolt (in-house conversion service) TAVOR SAR Conversion Kit (556NATO) TAVOR X95 Conversion Kit (9mm Para)
IWI TAVOR SAR or X95 Bolt Conversion for 5.56NATO or 300BLK!
Bullpup Armory is a CERTIFIED IWI TAVOR ARMORER! Send us your TAVOR SAR or X95, and we'll switch the ejection to the other side per IWI specs. When you get your rifle back, you'll have the new configuration, plus the original bolt, for when you need to switch back to the original configuration. Fastest turnaround times in the industry!

** IWI-US requires the Tavor barrel and new bolt to be headspaced by an IWI certified gun-smith/armorer **

* Bolts are not available without purchasing a barrel set, or sending your Tavor in for the install. (IWI Policy)
IWI TAVOR SAR Conversion Kit converts an existing 9mm rifle into a 5.56. Includes all the parts needed for the conversion, 5.56 barrel, bolt/bolt-carrier, ejection port frame & shell deflector, one 30 round magazine**, and a barrel lock wrench. 5.56 NATO conversion kit with a Cold Hammer Forged 16.5" barrel**, 1:7 twist, CrMoV steel. Longer muzzle devices sold separately.


** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
IWI TAVOR® X95™ Conversion Kit converts an existing 5.56 rifle into a 9mm. Includes all the parts needed for the 9mm X95™ conversion.
Please note this kit only works with the Tavor® X95™!

The 9mm kit will come in right hand configuration however it is fully convertible to left ejecting (follow the instructions in your owners manual).

** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
TAVOR X95 Conversion Kit (300 Blackout) Mepro Tru-Dot® Red Dot Sight (RDS) - 1.8 Dot Reticle Mepro M21 Self-Powered Day/Night Reflex Sight
List Price: $899.99
Our Price: $749.99
Our Price: $399.99
Sale Price: $349.99
Our Price: $524.99
Sale Price: $479.99
TAVOR X95 Conversion Kit (300 Blackout) Mepro Tru-Dot® Red Dot Sight (RDS) - 1.8 Dot Reticle Mepro M21 Self-Powered Day/Night Reflex Sight
IWI TAVOR® X95™ Conversion Kit converts an existing 5.56 rifle into a 300 Blackout (.300 AAC). Includes all the parts needed for the X95™ 300BLK conversion.
Please note this kit only works with the X95™!

16.5" Barrel
Right Hand Bolt
30-Round Magazine

** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
The Mepro Tru-Dot® RDS is an energy-efficient, compact sight, that provides thousands of operating hours while utilizing a single "AA" battery. Featuring battle-proven LED technology and rugged design, the sight assures reliability under the harshest environmental conditions. With its large display window and clearly-defined Red-dot, the Mepro Tru-Dot® RDS ensures rapid target acquisition with both eyes open. Offering four easily switchable reticle brightness intensities, the Mepro Tru-Dot® RDS fits every tactical scenario.

1.8 MOA Dot Reticle

Made in Israel
The Mepro M21 is a dual powered 30mm Reflex Sight, which collects sunlight in the day and uses tritium at night. Designed through close collaboration with Israeli Special Forces, the M21 was the first reflex sight in the world designed for close quarter combat, and has been continually improved, making it one of the most advanced sights available today. Bullpup Armory gets the most current production pieces, so these sights have the latest improvements (M revision).

Choose your reticle (Bullseye or Triangle)
Made in Israel.
MEPRO TRU-DOT RDS PRO MIL-SPEC RED DOT SIGHT Mepro MX3 Magnifier Mepro MX3 Magnifier with IDF-model adaptor
Our Price: $649.99
Sale Price: $599.99
Our Price: $529.99
Sale Price: $449.99
Our Price: $579.99
Sale Price: $499.99
MEPRO TRU-DOT RDS PRO MIL-SPEC RED DOT SIGHT Mepro MX3 Magnifier Mepro MX3 Magnifier with IDF-model adaptor
The MIL-SPEC, Mepro RDS PRO is exclusively available in the United States. Outside of the U.S., the RDS PRO is known as the Mepro M5 which is standard-issue to the most elite fighting forces and law enforcement agencies worldwide.

The Mepro RDS PRO is a MIL-SPEC, energy-efficient, compact sight that provides thousands of operating hours while utilizing a single “AA” lithium battery. With battle-proven LED technology and a rugged MIL-SPEC design it performs under the harshest environmental conditions.
With its large display window and clearly defined red dot, the Mepro RDS PRO ensures rapid target acquisition with both eyes open. Offering four easily switchable reticle brightness intensities, the Mepro Tru-Dot® RDS series optics fit every tactical scenario.

1.8 MOA Dot Reticle

Made in Israel
The MEPRO MX3 provides a decisive solution for any operator in the field. Its 3x magnification enhances the precision and effectiveness of reflex sights such as the MEPRO 21 and the MEPRO MOR. Attaches to any Mil-Std 1913 rail and has a quick detach lever.
Made in Israel.
The MEPRO MX3 provides a decisive solution for any operator in the field. Its 3x magnification enhances the precision and effectiveness of reflex sights such as the MEPRO 21 and the MEPRO MOR.
Built in Tavor adapter for mounting on your IDF-model Tavor (no "flat-top" rail).
Made in Israel.
JudoChop FS2000 Charging Handle Gear Head Works AUG Charging Handle - Mod 1 Man Kave PS90 Extended Charging Handle
Our Price: $59.99
Our Price: $34.99
Our Price: $52.99
JudoChop FS2000 Charging Handle Gear Head Works AUG Charging Handle - Mod 1 Man Kave PS90 Extended Charging Handle
Anodized aluminum replacement charging handle for the FS2000.  This robust replacement part fixes the issues with the original plastic piece, and provides a bigger and serrated surface for charging the Bullpup!

Made of T6 6061 Aluminum with mil-spec type 3 Class 2  hard anodize, Black

These "JudoChop" handles are precision engineered by Aerospace Resource Group manufacturing (Gen 4).
After 2 years with the original GHW AUG low profile charging handle we are happy to make available the next generation, the AUG-CH-Mod1.
This handle is lighter and shorter. It sticks out less and is a 1 finger charge size. It has a deep finger groove with serrations to ensure positive action. The outside edge is longer and much more contoured than the old design resulting in more comfort when the rifle is slung.

The biggest new feature to the Mod1 version is the ability to fold up and utilize the forward assist. By utilizing all the factory springs and hardware, the handle stays down in the ergonomic angle GHW's pioneered with the original handle. But when needed, simply push up on the handle and it folds to engage the forward assist. More serrations provide a slip free action when using it this way. The handle can also be folded up when locked back to give the rifle the ability to lay flatter on a surface. Normal operation still leaves the handle straight out to the side when locked back and it still has the ability to be slapped to unlock.

Made in the USA!

Extended Charging Handle for the PS90, more than doubles the surface area of the original part. Giving a more comfortable feel and positive contact when charging your PS90. Get one for the strong side, or two for extending on both sides.

Made in the USA!

Kel-Tec RFB Buttpad Spacers Homeland Guns Tavor Metal Safety - MAMBA AMP Engineering PS90 Tactical Trigger
Our Price: $39.99
Our Price: $29.99
Our Price: $69.99
Kel-Tec RFB Buttpad Spacers Homeland Guns Tavor Metal Safety - MAMBA AMP Engineering PS90 Tactical Trigger
The RFB Buttstock Spacers are designed to allow the shooter to customize the length of the RFB stock, effecting the length of pull. Each spacer will add approximately half an inch (0.55 inches) to the length of the RFB stock, allowing the shooter to customize their level of shooting comfort. The kit includes three (3) spacers.

Made in the USA!
This MAMBA metal safety is a direct drop in upgrade that will work on the left or right side of the Tavor. Available as BIG MAMBA or LIL MAMBA (sold individually). Use each safety in any combination to get a custom ambidextrous application. But typically, the BIG MAMBA is used on the "thumb" side of the rifle, giving a larger tactile surface for manipulating the safety. While the LIL MAMBA is used on the opposite side, and is a bit more sleek in design, to not be intrusive to the shooting hand holding the grip. But any single or combination will work for your particular needs.
AMP Engineering makes a revised and upgraded trigger for the PS90, making this awesome Bullpup even more comfortable and fun to shoot. Precisely CNC machined from 6061 aluminum bar stock, meticulously finished, microfinished, then hard black anodized to a mil-spec Type III finish. The AMP Engineering Tactical Trigger is far more comfort than the plastic stock trigger. Has an excellent tactile feel with a nicely curved face, beveled sides, line serrations, and skeletonized for weight savings. This trigger will not alter the pull weight, but with the improved ergonomics and positive trigger-finger manipulation, you'll appreciate the upgrade!

Made in the USA!
P90-PS90 Charging Handle - Oversized Extended - Nylon and Carbon Fiber P90-PS90 Charging Handle - Hook Style - Nylon and Carbon Fiber K and M Aerospace PS90 Folding Charging Handle - The Handler
Our Price: $19.99
Our Price: $19.99
Our Price: $49.99
P90-PS90 Charging Handle - Oversized Extended - Nylon and Carbon Fiber P90-PS90 Charging Handle - Hook Style - Nylon and Carbon Fiber K and M Aerospace PS90 Folding Charging Handle - The Handler

An Oversized Charging Handle for the P90/PS90, providing more surface area, and greater depth to manipulate the handle. One per package, but fits either side of the P90/PS90.

Black Nylon and Carbon Fiber.

Made in the USA!

A "hooked" Charging Handle for the P90/PS90, providing more surface area, and greater depth to manipulate the handle. One per package, but fits either side of the P90/PS90.

Black Nylon and Carbon Fiber for a super tough and strong part.

Made in the USA!

The Handler was developed by K&M Aerospace to solve the need for a replacement charging handle for the P90 / PS90. The folding charging handle is made out of aircraft grade aluminum and anodized to mil spec type III, class 2. There is a ball detent that keeps the handle folded in when not in use.

Made in the USA! Patent Pending
Kel-Tec RFB Tactical Operating Handle Homeland Guns K9 PS90 Charging Handle Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured
Our Price: $24.99
Our Price: $49.99
Sale Price: $39.99
Our Price: $13.99
Kel-Tec RFB Tactical Operating Handle Homeland Guns K9 PS90 Charging Handle Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured
The Kel-Tec RFB Tactical Operating Handle is approximately 100% longer, approximately 20% wider, and has a stronger, wider scallop cutout compared to the original RFB charging handle. The combination of these allow for easier and smoother operation. And, just like the original, it can be mounted on either side of the RFB (ambidextrous!)

Made in the USA!
The Homeland Guns K9 is an Aluminum charging handle for the FN PS90 that replaces the factory plastic knob. It has been hard coated Black, has a set screw installed, and there is an Allen-Key included. All you need to do is pry the plastic knob up and over the raised area on the charging bar and slide it off. The K9 slides right on and snugs up using the set screw. One handle per package, so you can do one side, or get two to be ambi!

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR and X95 with the redesign of the Shell Deflector.

For the 5.56 models. Shooting .223 or “light loads” through the Tavor SAR or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!
Percival Armaments - Tavor and X-95 Shell Deflector - angled face for the 9mm Percival Armaments - Tavor SAR Dust Protection Plate Percival Armaments - Tavor X95 Dust Protection Plate
Our Price: $13.99
Our Price: $8.99
Our Price: $8.99
Percival Armaments - Tavor and X-95 Shell Deflector - angled face for the 9mm Percival Armaments - Tavor SAR Dust Protection Plate Percival Armaments - Tavor X95 Dust Protection Plate

Percival Armaments makes improvements to the tactical shooting experience of the Tavor and X95 with the redesign of the 9mm Shell Deflector.

Shooting “light loads” through the Tavor or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR with the redesign of the Dust Protection Plate.

Adding an after-market charging handle/rod to both sides of the Tavor SAR is now possible while keeping the function of a dust protection plate as part of the gas system.
A Barrel Lock Wrench is needed to make this upgrade.

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor X95 with the redesign of the Dust Protection Plate.

Adding a charging handle/rod to both sides of the Tavor X95 is now possible while keeping the function of a dust protection plate as part of the gas system.
A Barrel Lock Wrench is needed to make this upgrade.

Made in the USA!
   
 

Copyright ©  Targeted Enterprises SC. All Rights Reserved. Built with Volusion