Percival Armaments - El Selector - Tavor Thumb Safety
|
|
Homeland Guns Tavor Metal Safety - MAMBA
|
|
Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured
|
|
|
|
|
|
|
Percival Armaments introduces the "EL SELECTOR" TAVOR THUMB SAFETY ! A 1911-style safety for the IWI Tavor®.
Solves the issue of having the lever in the way, and getting bumped
into the safe-position during a fire-fight. When in the fire-position,
the El Selector's create a shelf for the thumb on one side, and an
indexing point against (not under) the trigger finger on the other side. Creates a more repeatable grip, more positive purchase of the grip, and improved accuracy. Annodized Aluminum (6061-T6) for high-strength and light-weight. Available for the Left-side, Right-side, or both in the Ambi-Pack!
- "Patent Pending"
- Made in the USA!!
|
This MAMBA metal safety is a direct drop in upgrade that will work on the left or right side of the Tavor. Available as BIG MAMBA or LIL MAMBA (sold individually).
Use each safety in any combination to get a custom ambidextrous application. But typically, the BIG MAMBA is used on the "thumb" side of the rifle, giving a larger tactile surface for manipulating the safety. While the LIL MAMBA is used on the opposite side, and is a bit more sleek in design, to not be intrusive to the shooting hand holding the grip. But any single or combination will work for your particular needs.
|
Percival Armaments makes improvements
to the tactical shooting experience of the Tavor SAR and X95 with the redesign of
the Shell Deflector.
For the 5.56 models. Shooting .223 or “light loads”
through the Tavor SAR or X95 can cause the ejecting case to skip past the factory
shell deflector, and potentially hit the operator in the face or body (if
shooting from the ejection-port side).
The simple replacement of the upgraded Percival
Armaments Shell Deflector can help alleviate the issues, through an angled
deflector face, and taller body.
Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.
Made in the USA!
|
|
Percival Armaments - Tavor and X-95 Shell Deflector - angled face for the 9mm
|
|
Percival Armaments - Tavor SAR Dust Protection Plate
|
|
Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured - 300 AAC Blackout
|
|
|
|
|
|
|
Percival Armaments makes improvements
to the tactical shooting experience of the Tavor and X95 with the redesign of
the 9mm Shell Deflector.
Shooting “light loads”
through the Tavor or X95 can cause the ejecting case to skip past the factory
shell deflector, and potentially hit the operator in the face or body (if
shooting from the ejection-port side).
The simple replacement of the upgraded Percival
Armaments Shell Deflector can help alleviate the issues, through an angled
deflector face, and taller body.
Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.
Made in the USA!
|
Percival Armaments makes improvements
to the tactical shooting experience of the Tavor SAR with the redesign of
the Dust Protection Plate.
Adding an after-market charging handle/rod to both sides of the Tavor SAR is now possible while keeping the function of a dust protection plate as part of the gas system. A Barrel Lock Wrench is needed to make this upgrade. Made in the USA!
|
Percival Armaments makes improvements
to the tactical shooting experience of the Tavor SAR and X95 with the redesign of
the Shell Deflector.
For the 300 AAC Blackout models. Shooting sub-sonic or “light loads”
through the Tavor SAR or X95 can cause the ejecting case to skip past the factory
shell deflector, and potentially hit the operator in the face or body (if
shooting from the ejection-port side).
The simple replacement of the upgraded Percival
Armaments Shell Deflector can help alleviate the issues, through an angled
deflector face, and taller body.
Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.
Made in the USA!
|
|
ShootingSight TAV-TOOL - multi-tool specifically for the Tavor® X95 and SAR
|
|
IWI TAVOR Official Gunsmith Bench Mat
|
|
Bullpup Armory 4"x2" PVC Patch with Velcro Backing
|
|
|
|
|
|
|
ShootingSight LLC has developed a customized multi-tool specifically for the IWI Tavor®. Contains the critical tools to maintain the rifle, including:
Barrel Removal Tool, Screwdriver to adjust the front sight windage, Phillips Screwdriver to remove handguards, Hex Wrenches to remove top and side rails, Awl to lift out spring pin in swivel, Hex Bit Socket to allow customized tips for any optics (hex tips available at most hardware stores). NOW INCLUDES A 3mm HEX BIT FOR THE X95!
Choose your PALS/MOLLE POUCH in Black,Tan, or ODG
Tav-Tool made in the USA!
|
Gunsmith/Armorers bench mat with Tavor® SAR exploded view diagram and a list of parts. The
soft polyester-cloth top will protect your gun from scratches. The non-slip
neoprene rubber back will prevent chemicals and oils from damaging your
workspace.
12" x 36" x 1/8" thick
|
The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!
Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.
Made in the USA!
|
|