Accept Credit Cards Online


>

Enter Your Email To Sign Up
For Our E-Newsletter:


Home > BULLPUP CARBINES > IWI Tavor > TAVOR - Stocks/Conversions/Parts
Sort By:
Page of 2
TAVOR SAR Conversion Kit (9mm Para) Geissele Automatics - Tavor® Super Sabra Trigger Pack Geissele Automatics - Tavor® Super Sabra Lightning Bow Trigger
List Price: $899.99
Our Price: $749.99
more info
Our Price: $350.00
more info
Our Price: $99.00
more info
TAVOR SAR Conversion Kit (9mm Para) Geissele Automatics - Tavor® Super Sabra Trigger Pack Geissele Automatics - Tavor® Super Sabra Lightning Bow Trigger
IWI TAVOR SAR Conversion Kit converts an existing 5.56 rifle into a 9mm. Includes all the parts needed for the 9mm conversion, one 32 round magazine**, and a barrel lock wrench. 9mm Parabellum conversion kit with a Cold Hammer Forged 17" barrel**, 1:10 twist, CrMoV steel


** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)

The Geissele Super Sabra is a drop in replacement for the OEM Fire Control Group (commonly called the "Trigger Pack"). The Super Sabra provides a precision two-stage trigger pull and allows precise and accurate trigger control. Geissele's two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for close quarter combat (CQB). The Geissele Super Sabra also features an adjustable first stage, which will allow the shooter the ability to fine tune the first and second stage weight distribution, without compromising the total pull weight.


*This is a Generation 2 trigger pack that is fully compatible all IWI Tavor Rifles.

The Geissele Super Sabra Lightning Bow Trigger is precision machined from precipitation hardened 17-4 and is designed to replace the standard trigger in IWI Tavor® rifles. Once installed, the Sabra Lightning Bow is adjustable via a set screw that removes the “slack” that is inherently found in the trigger mechanism of those rifles. By removing the slack, the trigger pull is instantly transformed into a feel that is much more familiar to that of an M4 Carbine. Pairing the Sabra Lightning Bow with a Super Sabra Trigger Pack will result in a pull that is truly two stage and has a match grade feel.

TAVOR SAR or X95 556NATO Bolt (in-house conversion service) TAVOR SAR Conversion Kit (556NATO) Homeland Guns Tavor Metal Safety - MAMBA
Our Price: $109.99
Setup Cost: $30.00
more info
Our Price: $899.99
Sale Price: $799.99
more info
Our Price: $29.99
more info
TAVOR SAR or X95 556NATO Bolt (in-house conversion service) TAVOR SAR Conversion Kit (556NATO) Homeland Guns Tavor Metal Safety - MAMBA
IWI TAVOR SAR or X95 Bolt Conversion for 5.56NATO or 300BLK!
Bullpup Armory is a CERTIFIED IWI TAVOR ARMORER! Send us your TAVOR SAR or X95, and we'll switch the ejection to the other side per IWI specs. When you get your rifle back, you'll have the new configuration, plus the original bolt, for when you need to switch back to the original configuration. Fastest turnaround times in the industry!

** IWI-US requires the Tavor barrel and new bolt to be headspaced by an IWI certified gun-smith/armorer **

* Bolts are not available individually without purchasing a barrel set, or sending your Tavor to us for the install. (IWI Policy)
IWI TAVOR SAR Conversion Kit converts an existing 9mm rifle into a 5.56. Includes all the parts needed for the conversion, 5.56 barrel, bolt/bolt-carrier, ejection port frame & shell deflector, one 30 round magazine**, and a barrel lock wrench. 5.56 NATO conversion kit with a Cold Hammer Forged 16.5" barrel**, 1:7 twist, CrMoV steel. Longer muzzle devices sold separately.


** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
This MAMBA metal safety is a direct drop in upgrade that will work on the left or right side of the Tavor. Available as BIG MAMBA or LIL MAMBA (sold individually). Use each safety in any combination to get a custom ambidextrous application. But typically, the BIG MAMBA is used on the "thumb" side of the rifle, giving a larger tactile surface for manipulating the safety. While the LIL MAMBA is used on the opposite side, and is a bit more sleek in design, to not be intrusive to the shooting hand holding the grip. But any single or combination will work for your particular needs.
Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured Percival Armaments - Tavor and X-95 Shell Deflector - angled face for the 9mm Percival Armaments - Tavor SAR Dust Protection Plate
Our Price: $14.99
more info
Our Price: $14.99
more info
Our Price: $9.99
more info
Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured Percival Armaments - Tavor and X-95 Shell Deflector - angled face for the 9mm Percival Armaments - Tavor SAR Dust Protection Plate

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR and X95 with the redesign of the Shell Deflector.

For the 5.56 models. Shooting .223 or “light loads” through the Tavor SAR or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor and X95 with the redesign of the 9mm Shell Deflector.

Shooting “light loads” through the Tavor or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR with the redesign of the Dust Protection Plate.

Adding an after-market charging handle/rod to both sides of the Tavor SAR is now possible while keeping the function of a dust protection plate as part of the gas system.
A Barrel Lock Wrench is needed to make this upgrade.

Made in the USA!
Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured - 300 AAC Blackout Gear Head Works Tavor Razorback - Short Gear Head Works Tavor Razorback - Full Length
Our Price: $14.99
more info
Our Price: $123.99
more info
Our Price: $159.99
more info
Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured - 300 AAC Blackout Gear Head Works Tavor Razorback - Short Gear Head Works Tavor Razorback - Full Length

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR and X95 with the redesign of the Shell Deflector.

For the 300 AAC Blackout models. Shooting sub-sonic or “light loads” through the Tavor SAR or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!

Replacement rail for the Tavor SAR or X95. This is the "short" version. The SAR rail has a 20-slot rail that extends just over the gas block, and the X95 rail has 24-slots with the gas adjustment hole for 300BLK. Both add some height for a more comfortable cheek weld. Another advantage is that the rail does not need to be removed to do a barrel change (no re-zeroing!). The "short" version gives the flattop SAR owner a mod that inspires a more IDF-model look. And the X95 short rail is inspired by the Israeli sub-machine-gun X95.

Choose SAR or X95

Made in the USA!

** This listing is for the replacement rail only! The rifle, optics, and any other accessories shown are for display purposes only...

Replacement rail for the Tavor. This is the "Full Length" version, which is a 35-slot rail that is the same length as the flat-top models, but adds some height for a more comfortable cheek weld. Another advantage is that the rail does not need to be removed to do a barrel change (no re-zeroing!).

Made in the USA!

** This listing is for the replacement rail only! The rifle, optics, and any other accessories shown are for display purposes only...
Gear Head Works IDF Magnifier Rail Gear Head Works Tavor Razorback - IDF 101 Rail ShootingSight TAV-D - Tavor Trigger Pack
Our Price: $34.99
more info
Our Price: $94.99
more info
Our Price: $304.99
more info
Gear Head Works IDF Magnifier Rail Gear Head Works Tavor Razorback - IDF 101 Rail ShootingSight TAV-D - Tavor Trigger Pack

Finally IDF owners have a way to use thier own magnifier on their IDF-model Tavor. The Gear Head Works IDF Magnifier Rail has a 7-slot standard Mil Spec 1913 rail and a quick rotating mount all machined as one piece. It can be used with magnifiers, night vision, or thermal and allows the entire unit to be quickly removed from the rifle. No need for expensive QD rings. Use a standard fixed ring or mount and let this rail be the way you attach it in the field.

Made in the USA!

** IDF Model only! Not for use with "Flat-Top" Tavors... **

A taller rail for the IDF model Tavor, for a more comfortable cheek-weld. The IDF 101 Rail from Gear Head Works replaces the factory installed Mepro, attaching directly to the gas block (similar to the factory installed Mepro). And it still allows for a co-witness with the factory flip-up sights.

Made in the USA!

** IDF Model only! Not for use with "Flat-Top" Tavors... **
ShootingSight LLC has developed the "Drop-In" 2-Stage RPS Trigger (Fire Control Group) for the IWI Tavor X95 or SAR. With a major reworking of the internals, and using superior quality parts, the TAV-D gives the needed improvement to the only short-coming of the Tavor. With a 3-lb take-up, and 5-lb break, you will enjoy the smooth and crisp trigger operation of this perfect upgrade! This fire control pack will work in all US X95's and SAR's.

Choose between Delrin (polymer) housing or Annodized Aluminum (add $25)

Made in the USA!
ShootingSight TAV-D - TAVOR LE 2-STAGE RPS TRIGGER™ – DELRIN HOUSING Gear Head Works Tavor Razorback Front Sight Gear Head Works Tavor Modular Forearm (TMF) - M-Lok compatible
Our Price: $304.99
more info
Our Price: $48.99
more info
Our Price: $124.99
more info
ShootingSight TAV-D - TAVOR LE 2-STAGE RPS TRIGGER™ – DELRIN HOUSING Gear Head Works Tavor Razorback Front Sight Gear Head Works Tavor Modular Forearm (TMF) - M-Lok compatible
ShootingSight LLC has developed a 2-Stage "Drop-In" Trigger Pack (Fire Control Group) for the IWI Tavor X95 and SAR. The TAV-LE is a 2-stage trigger pack for the IWI Tavor rifle with a slightly higher pull force (than the TAV-D) for tactical use. With a major reworking of the internals, and using superior quality parts, the TAV-LE gives the needed improvement to the only short-coming of the Tavor. With a 4.5lb first stage, 6.5lb total pull (approximate), you will enjoy the smooth and crisp trigger operation of this perfect upgrade! This fire control pack will work in all X95 and SAR US receivers.

Made in the USA!

The Gear Head Works Razorback Front Sight matches up to most AR15 rear sights when used on your short Tavor Razorback. Inspired by the factory IDF front sight, it operates the same way, folding up and down just like the factory IDF front sight.

The Razorback Front Sight comes with genuine IDF hardware making it fully adjustable for elevation and windage. However, it does NOT come with a front sight post, plunger or plunger spring (typically the tritium front sight post, spring, and plunger should be used from your original flat top rail.)

Made in the USA!

An aluminum replacement forearm with modular capabilities for the Tavor by Gear Head Works, called the Tavor Modular Forearm, or simply the TMF. Light mounting is included! Attach 1" light or laser in-line with the barrel, slots for ventilation and accepts Magpul M-Lok accessories.
Black, FDE, or OD Green
Rifle, light, grip, pressure pad, and pad kit shown in pictures, not included.

Made in the USA!
Gear Head Works FLEx Swivel - Ejection Port Cover for the IWI Tavor and X95 IWI Tavor® 9mm Aluminum Muzzle Brake 4-5/8" IWI Tavor® 556NATO Aluminum Muzzle Brake 4-5/8"
Our Price: $49.99
more info
Our Price: $34.99
more info
Our Price: $34.99
more info
Gear Head Works FLEx Swivel - Ejection Port Cover for the IWI Tavor and X95 IWI Tavor® 9mm Aluminum Muzzle Brake 4-5/8" IWI Tavor® 556NATO Aluminum Muzzle Brake 4-5/8"

FLEx stands for Fulcrum Located Extra swivel. It provides a centralized location for use with a single point sling or just an additional swivel location for a 2 point. It can be mounted on either side of a Tavor or X95, with the swivel towards the front or rear of the rifle, replacing the plastic factory port cover. But its greatest feature may be that it also seals off the port from escaping gases that tend to leak out of the factory port cover. This phenomenon has become known as "Tavor face" and leaves you with black smudges on your cheek and shooting glasses, and is exacerbated with suppressor use. The GHW FLEx is truly a must have if you are running a suppressor on your Tavor or X95!

Made in the USA!

With this Tavor® muzzle brake you can extend your 9mm Tavor® to 30" overall length. With this Tavor® muzzle brake you can extend your 5.56/.233 Tavor® to 30" overall length.
Gear Head Works TAVOR Cocking Bar with Folding Charging Handle TAVOR SAR Fore Grip Rail - IWI factory part (Tavor SAR Forearm Picatinny) Homeland Guns - T-REx LT Aluminum TAVOR Fore-Grip Rail
Our Price: $79.99
more info
Our Price: $24.99
Sale Price: $19.99
more info
Our Price: $39.99
more info
Gear Head Works TAVOR Cocking Bar with Folding Charging Handle TAVOR SAR Fore Grip Rail - IWI factory part (Tavor SAR Forearm Picatinny) Homeland Guns - T-REx LT Aluminum TAVOR Fore-Grip Rail
A FOLDING Charging Handle with Cocking Bar for your Tavor® SAR. Gear Head Works has "hit it out of the park" with this Tavor upgrade!
The handle is ergonomic and fits the fingers nicely. With the detent, the handle will stay open or closed, and can be manipulated with the flick of a finger. In the folded position, it has clean lines and no longer protrudes, solving some of the issues with cases and certain sling positions. Can be installed on either side of the Tavor.

Made in the USA!
Polymer rail that attaches to the Fore-Grip for mounting a vertical grip to the TAVOR.

GRIP ADAPTOR ACCESSORIES ASSEMBLY - RAIL

IWI-US Factory Part # 0070475320
T-REx (Tavor Rail Excel) is an aluminum rail that attaches to the Fore-Grip for mounting a vertical grip to the TAVOR. Made from billet aluminum and is Hard Anodized in Black. Mounts using the existing mounting points of the Tavor SAR, and comes with the properly sized screw (NO drilling required!) And now the LT model (Long, Threaded) is longer with a threaded mounting hole for a bipod or sling swivel.

Made in the USA!
Tavor 9mm Barrel - 3 Lug Adapter - Tros Muzzle Device IWI TAVOR SAR Cocking Bar with Handle IWI TAVOR SAR Foregrip
Our Price: $55.99
more info
Our Price: $18.99
more info
Our Price: $14.99
more info
Tavor 9mm Barrel - 3 Lug Adapter - Tros Muzzle Device IWI TAVOR SAR Cocking Bar with Handle IWI TAVOR SAR Foregrip

This adapter fits the Tavor 9mm barrel, providing a HK-style 3-Lug mounting point for a suppressor. TrosUSA adapters are manufactured from 300 series stainless steel and are black oxide coated. Guaranteed to be concentric by the manufacturer.

Made in the USA!

A spare cocking bar, handle and general pin for your Tavor® SAR. If you've bent or notched your cocking rod, this is a must have factory replacement. Charging Handle, Rod Assembly, and Pin are included.

IWI-US Factory Part # TP0125
IWI factory polymer foregrip for your Tavor® SAR
Includes button cover.
Available in BLACK or FLAT DARK EARTH*
* Note: Flat Dark Earth color may not exactly match your Tavor® SAR in Flat Dark Earth due to slight variations in production batch to production batch.
Made in Israel
IWI-US Factory Part # TP018x
TAVOR SAR 556 NATO Barrel & Bolt Kit IWI TAVOR X95 Fire Control Hammer-Sear Pack IWI TAVOR SAR Bolt Parts Kit - 5.56 NATO "Survival Kit"
Our Price: $449.99
Sale Price: $399.99
more info
Our Price: $188.99
Sale Price: $179.99
more info
List Price: $49.99
Our Price: $44.99
more info
TAVOR SAR 556 NATO Barrel & Bolt Kit IWI TAVOR X95 Fire Control Hammer-Sear Pack IWI TAVOR SAR Bolt Parts Kit - 5.56 NATO "Survival Kit"
This IWI factory barrel and bolt kit comes head spaced from the factory and should be used together. Be sure to replace your bolt when replacing your barrel. Please check your local and state laws before assembling your Tavor® SAR with your new Barrel & Bolt Kit.


** Know your local laws! Certain items are restricted in some areas.
A complete drop in spare factory fire control pack for your Tavor® X95.  This fire control pack will work in both SAR and X95 receivers.  Reduces trigger pull weight when compared with the original Tavor® SAR Essential factory spare bolt parts with spare firing pin, firing pin spring, and other bolt parts for your Tavor® SAR or X95 in 5.56 NATO.
   
 

Copyright ©  Targeted Enterprises SC. All Rights Reserved. Built with Volusion