Accept Credit Cards Online


>

Enter Your Email To Sign Up
For Our E-Newsletter:


Home > BULLPUP CARBINES > IWI X-95 > X-95 - Action Parts
Sort By:
Page of 1
TAVOR SAR or X95 556NATO Bolt (in-house conversion service) TAVOR X95 Conversion Kit (9mm Para) TAVOR X95 Conversion Kit (300 Blackout)
Our Price: $109.99
List Price: $899.99
Our Price: $749.99
List Price: $899.99
Our Price: $749.99
TAVOR SAR or X95 556NATO Bolt (in-house conversion service) TAVOR X95 Conversion Kit (9mm Para) TAVOR X95 Conversion Kit (300 Blackout)
IWI TAVOR SAR or X95 Bolt Conversion for 5.56NATO or 300BLK!
Bullpup Armory is a CERTIFIED IWI TAVOR ARMORER! Send us your TAVOR SAR or X95, and we'll switch the ejection to the other side per IWI specs. When you get your rifle back, you'll have the new configuration, plus the original bolt, for when you need to switch back to the original configuration. Fastest turnaround times in the industry!

** IWI-US requires the Tavor barrel and new bolt to be headspaced by an IWI certified gun-smith/armorer **

* Bolts are not available without purchasing a barrel set, or sending your Tavor in for the install. (IWI Policy)
IWI TAVOR® X95™ Conversion Kit converts an existing 5.56 rifle into a 9mm. Includes all the parts needed for the 9mm X95™ conversion.
Please note this kit only works with the Tavor® X95™!

The 9mm kit will come in right hand configuration however it is fully convertible to left ejecting (follow the instructions in your owners manual).

** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
IWI TAVOR® X95™ Conversion Kit converts an existing 5.56 rifle into a 300 Blackout (.300 AAC). Includes all the parts needed for the X95™ 300BLK conversion.
Please note this kit only works with the X95™!

16.5" Barrel
Right Hand Bolt
30-Round Magazine

** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
Homeland Guns Tavor Metal Safety - MAMBA Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured Percival Armaments - Tavor and X-95 Shell Deflector - angled face for the 9mm
Our Price: $29.99
Our Price: $13.99
Our Price: $13.99
Homeland Guns Tavor Metal Safety - MAMBA Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured Percival Armaments - Tavor and X-95 Shell Deflector - angled face for the 9mm
This MAMBA metal safety is a direct drop in upgrade that will work on the left or right side of the Tavor. Available as BIG MAMBA or LIL MAMBA (sold individually). Use each safety in any combination to get a custom ambidextrous application. But typically, the BIG MAMBA is used on the "thumb" side of the rifle, giving a larger tactile surface for manipulating the safety. While the LIL MAMBA is used on the opposite side, and is a bit more sleek in design, to not be intrusive to the shooting hand holding the grip. But any single or combination will work for your particular needs.

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR and X95 with the redesign of the Shell Deflector.

For the 5.56 models. Shooting .223 or “light loads” through the Tavor SAR or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor and X95 with the redesign of the 9mm Shell Deflector.

Shooting “light loads” through the Tavor or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!
Percival Armaments - Tavor X95 Dust Protection Plate Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured - 300 AAC Blackout Gear Head Works FLEx Swivel - Ejection Port Cover for the IWI Tavor and X95
Our Price: $8.99
Our Price: $13.99
Our Price: $49.99
Percival Armaments - Tavor X95 Dust Protection Plate Percival Armaments - Tavor and X-95 Shell Deflector - Angled and Contoured - 300 AAC Blackout Gear Head Works FLEx Swivel - Ejection Port Cover for the IWI Tavor and X95

Percival Armaments makes improvements to the tactical shooting experience of the Tavor X95 with the redesign of the Dust Protection Plate.

Adding a charging handle/rod to both sides of the Tavor X95 is now possible while keeping the function of a dust protection plate as part of the gas system.
A Barrel Lock Wrench is needed to make this upgrade.

Made in the USA!

Percival Armaments makes improvements to the tactical shooting experience of the Tavor SAR and X95 with the redesign of the Shell Deflector.

For the 300 AAC Blackout models. Shooting sub-sonic or “light loads” through the Tavor SAR or X95 can cause the ejecting case to skip past the factory shell deflector, and potentially hit the operator in the face or body (if shooting from the ejection-port side).

The simple replacement of the upgraded Percival Armaments Shell Deflector can help alleviate the issues, through an angled deflector face, and taller body.

Select from RIGHT SIDE EJECTION or LEFT SIDE EJECTION.

Made in the USA!

FLEx stands for Fulcrum Located Extra swivel. It provides a centralized location for use with a single point sling or just an additional swivel location for a 2 point. It can be mounted on either side of a Tavor or X95, with the swivel towards the front or rear of the rifle, replacing the plastic factory port cover. But its greatest feature may be that it also seals off the port from escaping gases that tend to leak out of the factory port cover. This phenomenon has become known as "Tavor face" and leaves you with black smudges on your cheek and shooting glasses, and is exacerbated with suppressor use. The GHW FLEx is truly a must have if you are running a suppressor on your Tavor or X95!

Made in the USA!

IWI Tavor® 9mm Aluminum Muzzle Brake 4-5/8" IWI Tavor® 556NATO Aluminum Muzzle Brake 4-5/8" IWI TAVOR X95 Cocking Bar Assembly - charging handle with rod
Our Price: $34.99
Our Price: $34.99
Our Price: $24.99
IWI Tavor® 9mm Aluminum Muzzle Brake 4-5/8" IWI Tavor® 556NATO Aluminum Muzzle Brake 4-5/8" IWI TAVOR X95 Cocking Bar Assembly - charging handle with rod
With this Tavor® muzzle brake you can extend your 9mm Tavor® to 30" overall length. With this Tavor® muzzle brake you can extend your 5.56/.233 Tavor® to 30" overall length. A spare cocking bar with handle for your Tavor® X95. If you've bent or notched your cocking rod, or just want a second for dual handles, this is a must-have factory replacement. Assembled Charging Handle and Rod.

IWI-US Factory Part # TXP0020
IWI TAVOR X95 Fire Control Hammer-Sear Pack IWI TAVOR SAR Bolt Parts Kit - 5.56 NATO "Survival Kit" IWI TAVOR SAR-X95 Barrel Locking Pivot Assembly
Our Price: $188.99
Sale Price: $179.99
List Price: $49.99
Our Price: $44.99
Our Price: $37.99
IWI TAVOR X95 Fire Control Hammer-Sear Pack IWI TAVOR SAR Bolt Parts Kit - 5.56 NATO "Survival Kit" IWI TAVOR SAR-X95 Barrel Locking Pivot Assembly
A complete drop in spare factory fire control pack for your Tavor® X95.  This fire control pack will work in both SAR and X95 receivers.  Reduces trigger pull weight when compared with the original Tavor® SAR Essential factory spare bolt parts with spare firing pin, firing pin spring, and other bolt parts for your Tavor® SAR or X95 in 5.56 NATO. Broke your pivot?! Here's a spare barrel pivot lock for your Tavor® SAR or Tavor® X95™. You will need a Tavor® Barrel Wrench Tool to complete the process.

The removal and installation of this part should be completed by a certified gunsmith/armorer. BULLPUP ARMORY is IWI Certified! Contact us, if you want us to install/repair your Tavor...
IWI TAVOR SAR Firing Pin with spring - 556NATO Bullpup Armory - TAVOR and X-95 Barrel Lock Wrench ShootingSight TAV-TOOL - multi-tool specifically for the Tavor®
List Price: $19.99
Our Price: $17.99
Our Price: $13.99
Our Price: $37.99
IWI TAVOR SAR Firing Pin with spring - 556NATO Bullpup Armory - TAVOR and X-95 Barrel Lock Wrench ShootingSight TAV-TOOL - multi-tool specifically for the Tavor®
Spare factory firing pin and firing pin spring for your Tavor® SAR and X-95 in 5.56 NATO IWI TAVOR SAR & X-95 Barrel Lock Wrench. Made from 17-4PH Stainless, with a rubberized handle. Hardened strength, corrosion resistant, and a comfortable grip that won't scratch your Tavor!

Always refer to the IWI Owners Manual when disassembling-reassembling a Tavor/X-95.

Made in the USA!
ShootingSight LLC has developed a customized multi-tool specifically for the IWI Tavor®. Contains the critical tools to maintain the rifle, including: Barrel Removal Tool, Screwdriver to adjust the front sight windage, Phillips Screwdriver to remove handguards, Hex Wrenches to remove top and side rails, Awl to lift out spring pin in swivel, Hex Bit Socket to allow customized tips for any optics ( hex tips available at most hardware stores). NOW INCLUDES A 3mm HEX BIT FOR THE X95!

Add a PALS/MOLLE Pouch in Black,Tan, or ODG for just $5 more!

Tav-Tool made in the USA!
Bullpup Armory 4"x2" PVC Patch with Velcro Backing
Our Price: $4.99
Bullpup Armory 4"x2" PVC Patch with Velcro Backing

The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!

Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.

Made in the USA!
   
 

Copyright ©  Targeted Enterprises SC. All Rights Reserved. Built with Volusion