Accept Credit Cards Online


>

Enter Your Email To Sign Up
For Our E-Newsletter:


Home > BULLPUP RIMFIRES > Aklys Defense ZK22 > ZK22 - Slings/Swivels/Mounts
Sort By:
Page of 1
Blue Force Gear VCAS Padded Sling Blue Force Gear Vickars VCAS 221 Padded Sling - 2to1 with R.E.D. Swivel Knob Magpul Sling Mount Kit - Type 1 - QD Cup
Our Price: $54.99
Our Price: $94.99
Our Price: $15.99
Blue Force Gear VCAS Padded Sling Blue Force Gear Vickars VCAS 221 Padded Sling - 2to1 with R.E.D. Swivel Knob Magpul Sling Mount Kit - Type 1 - QD Cup
The Vickers Combat Applications Sling has revolutionized the way rifles are carried. Ability to quickly transition from carrying a slung rifle comfortably to combat ready, the patent pending Quick Adjust has bridged the gap between the two primary uses of rifle slings – from transporting to fighting. The padded, two-point VCAS is available in Black or Coyote Brown.

Made in the USA!

While 2-point slings are ideal for most situations, there are times when a 1-point sling has a clear advantage. Combining the polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjust-ability of the sling is still maintained in both 1 and 2 point modes.

The 221™ Sling fits any weapon with two QD sling swivel sockets.

The padded, 221 VCAS is available in Black or Coyote Brown.

Made in the USA!
Sling Mount Kit - Type 1 QD cups for use with push-button QD sling swivels.

The hole, for the enclosed button head screws, is not threaded.  The chosen screw simply passes through the hole in the bottom of the cup.

Heavy-duty black phosphatized steel construction easily installs with provided hardware.
Swivels not included.

Made in U.S.A.
Magpul Sling Mount Kit - Type 2 - QD Cup Magpul Sling Mount Kit - Type 3 - QD Cup Magpul MS3 Dual-ParaClip GEN2 Sling
Our Price: $18.99
Sale Price: $17.99
Our Price: $14.99
Our Price: $48.99
Magpul Sling Mount Kit - Type 2 - QD Cup Magpul Sling Mount Kit - Type 3 - QD Cup Magpul MS3
Sling Mount Kit - Type 2 QD cup for use with push-button QD sling swivels.

The hole, in the bottom of the cup, is threaded.

Heavy-duty black phosphatized steel construction.
Swivel(s) and screw(s) not included.

Made in U.S.A.
Sling Mount Kit - Type 3 QD cup for use with push-button QD sling swivels.

The hole, in the bottom of the 3/4" tall (deep) cup, is threaded. And comes with a 10/24 x 1" button head screw and nut

Heavy-duty black phosphatized steel construction.
Swivel(s) not included.

Made in U.S.A.
The MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. The rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure.

The MS3 GEN 2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.


Black or Coyote Brown
Made in U.S.A.
Magpul RSA QD Rail Sling Attachment Magpul MS4 Dual QD GEN2 Sling Magpul RSA Rail Sling Attachment
Our Price: $28.99
Our Price: $58.99
Our Price: $28.99
Magpul RSA QD Magpul MS4 Magpul RSA

The RSA QD provides a sling attachment point for the MS4 and other QD sling systems • Steel construction • Melonite finish • Compatible with 1913 Picatinny rails

The MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip™ aling with a steel D-Ring to allow one to two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD.

The MS4 Dual QD GEN 2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.

Made in U.S.A.

• All cast steel construction • Mil-spec black manganese phosphate finish • Works on any standard 1913 Picatinny-spec rail

GG&G QD Rail Side Sling Mount Magpul MS3 Single-QD and Single-ParaClip GEN2 Sling Damage Industries Multi Mount
Our Price: $44.99
Our Price: $54.99
Our Price: $19.99
GG&G QD Rail Side Sling Mount Magpul MS3 Damage Industries Multi Mount
The Quick Detach Sling Mount For Dovetails keeps the weapon slung in the correct position to avoid canting outwards away from your body.The QD swivel socket has limited rotation built in to prevent sling wrap-up.
Accepts all Heavy Duty or Standard push button sling swivels.
Mount comes complete with one GG&G Enhanced Heavy Duty Rectangular QD sling swivel.

Perfect for the rear-lower rail of the RFB!

Made in the U.S.A.

Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD sling swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip™. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN 2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.

Made in U.S.A.
Attach your sling in multiple configurations on any 1913 rail. Mount it to the top, sides or bottom of your rifle with loop, QD swivel, snap-hook, Mash hook, or paracord. QD sockets have anti-rotational limits. Constructed of billet aluminum with Mil-A-8625 type III class 2 hardcoat anodize. Black. Swivel/hook not included. Sold individually.

Made in the USA!
Magpul QD ParaClip Adapter Troy Mash Hook QD Swivel
Our Price: $15.99
Our Price: $9.99
Our Price: $9.99
Magpul QD ParaClip Adapter Troy Mash Hook QD Swivel
Adapts QD swivel sockets for use with Paraclips and other clip-in sling attachments. Precision-cast Melonite finished steel for extreme resistance to wear and corrosion.

Made in the USA!
MASH Hook (Metal All-purpose Snap Hook) Heavy Duty QD Sling Swivels.
Sold individually
Choose from:
1.25" Oval,  Large D-Loop,  Small D-Loop,  Angular 1" (add $9 for the angular swivel)

Made in the USA
Blue Force Gear RED Swivel - Rapid Emergency Detachment Bullpup Armory 4"x2" PVC Patch with Velcro Backing
Our Price: $29.99
Our Price: $4.99
Blue Force Gear RED Swivel - Rapid Emergency Detachment Bullpup Armory 4"x2" PVC Patch with Velcro Backing
The RED Swivel is a true emergency quick release swivel that allows the user to quickly get free for emergency egress or untangle. The Patented RED Swivel, or Rapid Emergency Detachment Swivel, replaces standard push button sling swivels with a pull-knob emergency release swivel that fits any standard push button sockets, sockets inset in popular handguards and stocks.

Fits 1" and 1.25" sling webbing. One RED Swivel per package.

Made in the USA!

The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!

Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.

Made in the USA!
   
 

Copyright ©  Targeted Enterprises SC. All Rights Reserved. Built with Volusion