|
Blue Force Gear VCAS Padded Sling
|
|
PMM PS90-P90 QD Sling Mount
|
|
Magpul MS3 Dual-ParaClip GEN2 Sling
|
|
|
|
|
|
|
|
The Vickers Combat Applications Sling has revolutionized the way rifles are carried. Ability to quickly transition from carrying a slung rifle comfortably to combat ready, the patent pending Quick Adjust has bridged the gap between the two primary uses of rifle slings – from transporting to fighting. The padded, two-point VCAS is available in Black or Coyote Brown.
Made in the USA!
|
Parker Mountain Machine makes a low cost and easy Quick Release Sling Mount for your FN Herstal PS90-P90 PDW. Using the existing Frame Hardware counter bored Holes PMM has come up with QD mounting solution that will allow you to mount the PMM PS90-P90 QD cup in almost any of the frame hardware points on either side of the Ps90-P90.
CNC'd out of 1018 Steel then Melonite plated per military standards, this sling mount is a low cost, simple way to improve the operating functions for your Ps90-P90. Sold individually. Choose a 360-degree (Full) rotation cup or the Locking (Limited) movement cup.
Made in the USA!
|
The MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. The rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure.
The MS3 GEN 2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.
Black or Coyote Brown
Made in U.S.A.
|
|
|
|
Magpul MS4 Dual QD GEN2 Sling
|
|
Percival Armaments FN PS90 Sling Adaptor
|
|
Magpul MS3 Single-QD and Single-ParaClip GEN2 Sling
|
|
|
|
|
|
|
|
|
The
MS4 can quickly switch between one-point and two-point configuration.
The MS4 maintains material construction and specifications identical to
that of the standard MS3, but features two heavy-duty push-button QD
sling swivels rather than the Magpul Paraclip™ aling with a steel D-Ring
to allow one to two-point convertibility. This modification allows
compatibility with QD sling cups commonly found on lower receivers,
receiver end plates, buttstocks, and many low-profile forward QD Sling
mounts, including the Magpul RSA-QD.
The MS4 Dual QD GEN 2 incorporates a new low profile quick-adjust
Slider which minimizes bulk and allows for secure, yet effortless, sling
adjustment. Webbing length has also been increased for a comfortable
fit with all body types and armor configurations.
Made in U.S.A.
|
Sling your PS90/P90 (or 90/22) with this simple but sturdy adapter.
Constructed of quality Mil-Spec webbing (Berry Amendment and IR Compliant and made to military specifications) with all metal hardware (hardened steel D-ring and Loop)! This thin but strong strap is designed to hold up to any rigors you can put it through.
Designed for quick attachment of single-point sling (HK Hook, Para-Clip, etc) to the rear of a FN P90/PS90.
Proudly made in the USA!
|
Filling the same mission requirement as the standard MS3 Sling, the
MS3 Single QD can quickly switch between one-point and two-point
configuration. The MS3 Single QD maintains material construction and
specifications identical to that of the standard MS3, but features a
heavy-duty push-button QD sling swivel for the one-point (rear) weapon
attachment rather than the Magpul Paraclip™. This modification allows
compatibility with QD sling cups commonly found on lower receivers,
receiver end plates, and buttstocks. The MS3 Single QD GEN 2
incorporates a new low profile quick-adjust Slider which minimizes bulk
and allows for secure, yet effortless, sling adjustment. Webbing length
has also been increased for a comfortable fit with all body types and
armor configurations.
Made in U.S.A.
|
|
|
|
Damage Industries Multi Mount
|
|
Magpul QD ParaClip Adapter
|
|
Troy Mash Hook
|
|
|
|
|
|
|
|
Attach your sling in multiple configurations on any 1913 rail. Mount it to the top, sides or bottom of your rifle with loop, QD swivel, snap-hook, Mash hook, or paracord. QD sockets have anti-rotational limits. Constructed of billet aluminum with Mil-A-8625 type III class 2 hardcoat anodize. Black.
Swivel/hook not included.
Sold individually.
Made in the USA!
|
Adapts QD swivel sockets for use with Paraclips and other clip-in sling attachments. Precision-cast Melonite finished steel for extreme resistance to wear and corrosion.
Made in the USA!
|
MASH Hook (Metal All-purpose Snap Hook)
|
|
|
|
QD Swivel
|
|
Percival Armaments PS90 Side Rail - with QD Port
|
|
Percival Armaments PS90 7-slot Side Rail
|
|
|
|
|
|
|
|
Heavy Duty QD Sling Swivels.
Sold individually
Choose from:
1.25" Oval, Large D-Loop, Small D-Loop, Angular 1" (add $9 for the angular swivel)
Made in the USA
|
A 9-slot Side Rail for the P90/PS90 with QD Port. Fits on either side of the receiver (into the existing tapped holes), and has built in standoff mounts, so accessories will clear. With the QD Port mounted towards the rear, your sling won't be in the way of lights/lasers on the rail.
Precision
machined aluminum with a Mil-spec anodized finish.
Made in USA!
|
A 7-slot Side Rail for the P90/PS90. Fits on either side of the receiver (into the existing tapped holes), and is close to the receiver, but not quite flush. The 7-slot rail has built in 3/16" standoff mounts, so accessories will clear. The entire rail is only 3/8" off the receiver.
Precision
machined aluminum with a Mil-spec anodized black finish.
Made in USA!
|
|
|
|
Percival Armaments PS90 Polymer Side Rail
|
|
Bullpup Armory 4"x2" PVC Patch with Velcro Backing
|
|
|
|
|
|
|
|
A 7-slot Polymer Side Rail for the P90/PS90. Fits on either side of the receiver (into the existing tapped holes), and is close to the receiver, but not quite flush. The 7-slot rail has built in 3/16" standoff mounts, so accessories will clear, and is a one-piece design. The entire rail is only 3/8" off the receiver. Very light weight, but extremely tough and durable.
Black polymer - paintable - includes mounting screws
Made in USA!
|
The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!
Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.
Made in the USA!
|
|
|
